Nev, I guess you are talking about the original SR3000 which had lots of
cogs in it, not the new, completely different (as of this summer)
design, which looks cogless and very impressive
Nev, I guess you are talking about the original SR3000 design, which had
lots of cogs in it, not the totally redesigned one(as from this summer)
which has no cogs and looks very impressive.
Regards, David Joyce
PS. Sorry my previous attempt at tjis came out as garbage!
On 2016-11-09 16:30, Neville Eyre wrote:
> Having fitted dozens of Airmaster's, and just recently fitted a Woodcomp there
is no comparison, Airmaster is more than twice as good [ mechanically]
>
> -----Original Message-----
> From: jglazener <j.glazener@planet.nl>
> To: europa-list <europa-list@matronics.com>
> Sent: Wed, 9 Nov 2016 15:35
> Subject: Europa-List: Airmaster or Woodcomp?
>
>
> I am rapidly getting to the point where I need to select my propeller to go
> with
a 912ULS engine. Having already decided on an in flight adjustable, the choice
seems to come down to the following:
>
> Airmaster AP332 with Whirlwind blades and AC200 CS controller. Eur ~6000
>
> Woodcomp SR3000 with CS5 CS controller. Eur 4000
>
> Woodcomp SR3000 with manual controller. Eur 3500
>
> Based on the price I can surmise thet the Airmaster is better, but is it twice
as good, and more importantly, is the Woodcomp maybe good enough?
>
> Then there is the choice between CS and manual which the Woodcomp offers.
> Manual
is cheaper and as a first timer I want to keep things simple, so that has
some appeal. The importer also kindly mentioned that he does not have good
experiences
with the CS setup, which is either refreshingly homest or an indication
of a dud product.
>
> So which is it to be? Your opinions and experiences would be highly
> appreciated!
>
> --------
> Jeroen
>
> http://www.europaowners.org/main.php?g2_itemId=44165 [1]
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=462236#462236 [2]
Links:
------
[1] http://www.europaowners.org/main.php?g2_itemId=44165
[2] http://forums.matronics.com/viewtopic.php?p=462236#462236
|