On 6 Jun 2015, at 13:29, jonathanmilbank <jdmilbank@yahoo.co.uk> wrote:
> Your suspension block is probably different from mine, which was one of the
> earliest
and came needing work done by the builder. It was red in colour, solid
and thus needed holes bored through with a hole saw in a drill press. A band
saw was needed to cut out 'V' wedges top and bottom and finally the factory
decided
that the block wasn't thick enough, so we had to add in a shim made from
a piece of 1/4" ply board.
> Therefore I guess that it's unsurprising that your problems are different.
> Still,
you might have been in possession of one of the early blocks if you had bought
an old kit from someone.
Jonathan - no, my block is of the newer sort, black with the hole and the
notches
already cut out. Anyway, I suspect that the solution to my problem may lie
elsewhere so I dont want to focus on one thing to the detriment of the big
picture!
in friendship
Rowland
| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson
| pictures: http://picasaweb.google.com/rowlandcarson
|