Vic=2C
Seems to me that the tailplanes should line up with the wings=2C i.e. spar
bushes.Ignore the other readings.Karl
> Date: Sat=2C 6 Dec 2014 14:53:52 +0000
> From: pete@lawless.info
> To: europa-list@matronics.com
> Subject: Re: Europa-List: torque tube
>
>
> Hi Vic
>
> The seats are part of the cockpit module glued into place as part of the
> build. Very probable that it was fitted at a slight angle to the
> fuselage. Should stick with the wing spar as they agree with the top of
> the foot well=2C which is all pre moulded.
>
> Regards
>
> Pete
>
> On 06/12/14 14:32=2C fraser221 wrote:
> >
> > i am working on restoring a classic mono to flying condition and in the
process of changing the tp11 bushes for the torque tube.
> >
> > i have checked the levels at 3 different points=2C the wing spar bushes
=2C top of footwell forward of the firewall and on top of the seat module b
ehind the headrests (on uncarpeted surface).
> >
> > i get a similar reading between the spar bushes and the footwell tops b
ut quite different on the seat module.
> >
> > is this a problem or am i right in thinking that the spar bushes should
be the one to use?
> >
> > hope someone out there can assist.
> >
> > Vic
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=435414#435414
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
===========
===========
===========
===========
>
>
>
|