Hi Vic
The seats are part of the cockpit module glued into place as part of the
build. Very probable that it was fitted at a slight angle to the
fuselage. Should stick with the wing spar as they agree with the top of
the foot well, which is all pre moulded.
Regards
Pete
On 06/12/14 14:32, fraser221 wrote:
>
> i am working on restoring a classic mono to flying condition and in the
> process
of changing the tp11 bushes for the torque tube.
>
> i have checked the levels at 3 different points, the wing spar bushes, top of
footwell forward of the firewall and on top of the seat module behind the
headrests
(on uncarpeted surface).
>
> i get a similar reading between the spar bushes and the footwell tops but
> quite
different on the seat module.
>
> is this a problem or am i right in thinking that the spar bushes should be the
one to use?
>
> hope someone out there can assist.
>
> Vic
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=435414#435414
>
>
|