Tony,
See attachment in fixing the aluminium pipe supplied by me.
It is purposely too long to allow for different fittings.
Position the =9Ccobra=9D first with your splash moulding.
Don=99t forget to reinforce the skin behind the cobra moulding
with 3 layers of Bid to prevent deforming skin in hot temperatures
(Aussie)
Cut it, the pipe, gradually back , a little at a time until you have the
correct fit.
The rubber piping at each end allows for mistakes.
Once it is joined up then do the lay ups to the wall for the cobra.
Puts some blue foam at the back of the cobra to allow for the shape and
expansion.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand
Ph; 03 3515166
Mob; 0210640221
email; ward.t@xtra.co.nz
|