I believe there is an error in the 912S installation menu (one of many maybe!!)
As regards to attaching the Sealing Strips onto the cooling duct it states:
"Rivet sealing strip to the bottom sides of the duct using TAPK33BS rivets with
EUR011 load spreading washers to prevent the rivets pulling through the sealing
material."
The TAPK33BS are countersunk rivets and there is no way they will pull through
onto the EURO11 washers.
I think the rivets should be "TAPD46BS rivets". The diameter of these is perfect
for the EURO11 washers. The 914 installation manual has this.
Can someone please confirm this.
Regards
Malcolm Hendra (Kit 121)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=341446#341446
|