europa-list
[Top] [All Lists]

RE: SV: Europa-List: Carb, fuel and oil tube heat shielding

Subject: RE: SV: Europa-List: Carb, fuel and oil tube heat shielding
From: Brian Davies <brian.davies@clara.co.uk>
Date: Wed, 11 May 2011 16:31:30
Nice pic, Graham.


Is it flying again?


Brian


From: owner-europa-list-server@matronics.com 
[mailto:owner-europa-list-server@matronics.com] On Behalf Of GRAHAM 
SINGLETON
Sent: 11 May 2011 14:44
Subject: Re: SV: Europa-List: Carb, fuel and oil tube heat shielding


Hi Brian
maybe I should do it on my Lycoming. Plenty of heat under that cowling. 
The exhaust extraction works well though.
Graham


  _____  

From: Brian Davies <brian.davies@clara.co.uk>
Sent: Wednesday, 11 May, 2011 14:03:25
Subject: RE: SV: Europa-List: Carb, fuel and oil tube heat shielding

Graham,


The modern stuff does not do that, but is very expensive.=C3=82  It is 
interesting that the LAA approves it on some Rotax 912 installations.


Regards


Brian


From: owner-europa-list-server@matronics.com 
[mailto:owner-europa-list-server@matronics.com] On Behalf Of GRAHAM 
SINGLETON
Sent: 11 May 2011 12:01
Subject: Re: SV: Europa-List: Carb, fuel and oil tube heat shielding


I agree Sven,
there is also the problem of wear and tear of the wrapping. We used to 
find it shed fibres and dust into the engine bay which is not very good. 
There's probably too much low frequency vibration.
Graham


  _____  

From: Sidsel & Svein Johnsen <sidsel.svein@oslo.online.no>
Sent: Wednesday, 11 May, 2011 9:26:02
Subject: SV: Europa-List: Carb, fuel and oil tube heat shielding

Brian,


I do not want to recommend for or against exhaust wrapping, because I 
have no experience with it, but my quick comment is this:


I would rather not reduce the air cooling of the exhaust pipes.  Have 
you seen the photo from Rotax=C3=A2=82=AC=84=A2 engine test bed, 
at max take-off condition?  Frightening, if you did not know that it is 
designed to take it:  The exhaust pipes are literally glowing red!


After I saw this, I always think about it at lift-off and reduce to 
climb setting as soon as it is safe.


My personal view is therefore to reduce the radiation that hits the 
carbs and rubber hoses as much as possible, rather than trying to 
prevent the heat from escaping its source.  Shielding the carbs and the 
hoses has only positive effects, and weighs very little.


Regards

Svein

http://www.matronics.com/Navigator?_blank"; 
href="http://forums.matronics.com";>http://forums.matronics.com  =C3=82 
=C3=82 =C3=82 =C3=82 =C3=82  - The
 Europa-List Email Forum utilities such as List Photoshare, and much 
much =C3=82 =C3=82  --> 
http://www.matron===================
 <http://www.matronics.com/Navigator?Europa-List>  
<http://www.matronics.com/Navigator?Europa-List> <  =C3=82 =C3=82 =C3=82 
=C3=82  - MATRONICS WEB FORUMS via the Web =C3=82 =C3=82  --> 
http://forums.matronics.com =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 
=C3=82 =C3=82  - List Contribution Web generous  =C3=82 =C3=82 =C3=82 
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82  =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 
-Matt http://www.matronics.com/c= 
<http://www.matronics.com/contribution> 
 <http://www.matronics.com/contribution>   
courier <http://www.matronics.com/contribution> " size="2" 
color="#000000">http://www.matronilow 
<http://www.matronics.com/Navigator?Europa-List> " target="_blank" 
href="http://forums.matronics.com";>http://forums.m=   --> 


<Prev in Thread] Current Thread [Next in Thread>