Subject: | Europa-List: Instrument sub panel size & thickness |
---|---|
From: | Tony Renshaw <tonyrenshaw268@gmail.com> |
Date: | Sat, 15 May 2010 13:45:27 |
> I am interested in what type of metal sheet is recommended for > instrument sub panels, and any advice on how close to the outside > edges of the main panel I should remove, or whether it is limited by > the ply inserts? I am not in the same state as my panel so I can't > check, but to "maxise" the main sub- panel size, should I disregard > the ply reinforcing and tailor strengthen my own attach points? I > would also be interested to know what method of attachments has > worked for others. All help appreciated. Reg Tony Renshaw Sydney Aussie > |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Europa-List: Re: Electrics- Help requested for Electrics Bill of Material, rparigoris |
---|---|
Next by Date: | Re: Europa-List: Electrics- Help requested for Electrics Bill of Material, Frans Veldman |
Previous by Thread: | Europa-List: Re: Electrics- Help requested for Electrics Bill of Material, rparigoris |
Next by Thread: | Europa-List: Re: SS Ball joints, rparigoris |
Indexes: | [Date] [Thread] [Top] [All Lists] |