Re: Europa-List: How to ground rempte mounted VDO oil pressure gauge.

[Bob Borger <rlborger@mac.com>]

Hi Ron,

No, did not tap the the aluminum bracket.  Just added a couple washers between
the bracket and the female union to hold it all in place when the union was 
screwed
up tight.  No spacer.  Just lots of tight mechanical connection to make
the ground through the bracket.  It's one thing that has worked properly from
first startup.  That is, after I filled the connecting oil line with oil first.
Can't be any  entrapped air.

Bob


On Wednesday, February 17, 2010, at 09:54AM, <rparigor@suffolk.lib.ny.us> wrote:
>