Klaus
There was a type in the contact address for the pump should be
/www.ruddies-berlin.de/
Pete
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Klaus Dietrich
Sent: 09 December 2009 10:22
Subject: Europa-List: MkI with 912S
After over 1000h on my good 912, I'm thinking about "upgrading" my Europa
"Mk I" (mono) with a new 912 "S" engine.
I'm wondering if the "Mk I" cowling with it's radiators will be ok for the
912S, or if I have to change the cowling/engine mount etc to the "Mk II"
version...
In my current installation I have mounted the oil cooler just below the
spinner in the lower cowling and never had any tempreature issues.
Is anybody out there having an original "Europa Mk I" with a 912S?
Appreciate your advise!
Thanks,
Klaus
(OE-CKD, 134)
--
This message has been scanned for viruses and
dangerous content by <http://www.houxou.com/> Houxou, and is
believed to be clean.
Checked by AVG - www.avg.com
07:34:00
|