Tim
should work fine but not as easy to fit a stub into the hose. Not sure
how I'd do it
Graham
Tim Houlihan wrote:
> <houlihan@blueyonder.co.uk>
>
> Hi
> Would this solution work in the Classic original setup ? assuming you
> run the vent pipe to the top of the filler pipe in the alloy receptacle
>
> Tim Houlihan.
>
> Graham Singleton wrote:
>> Peter Jeffers wrote:
>>> I think many of us have seen this issue of fuel venting on warm to
>>> hot days
>>> due to air/fuel vapour expansion.
>>> The cure (and it works fine) is to route the vent pipe from the
>>> tank, to the
>>> filler neck instead of the roof vent tube. Thus as fuel tries to vent
>>> overboard, as in the past, it now vents back into the tank. Saves
>>> the mess
>>> on the paintwork and also saves precious fuel!!!
>>> You will however still need to vent the tank, so a further
>>> connection int
|