Hi Troy,
I'd suggest using Aeroquip 666 hose for the oil line, however it is
expensive.
A friend was surprised to find that the heat from his 914 had made
the original
rubber hose quite brittle after a couple of years flying.
Dave
On 1-Aug-08, at 8:16 AM, Troy Maynor wrote:
>
> I am installing the engine now. I have two pieces of hose that came
> with a
> classic FWF several years ago. I am wanting to know if the
> following is
> still acceptable to use.
> One has 3 red stripes, and on the hose is written"SEMPERIT TU 25 BAR
> BENZIN/0L PETROL/OIL ANTI-STATIC". It measures approximately 13.5mm
> IDx 1300
> mm.
> Hose two is solid black and is spirally wrapped, and is written
> "CONTI-TCH-OLNS-1-12 X 3.5 >AEM< >AEM<". It measures
> approximately 12.5
> mm ID x 1540 mm.
> I didn't get much of an engine installation manual either, so any
> tips would
> be appreciated.
>
>
> Troy Maynor
> N120EU Europa Monowheel Classic
> <winmail.dat>
|