Many thanks, Roland, that's very helpful.
Best wishes
Willie
On 9 May 2008, at 12:25, Rowland Carson wrote:
>
>> I am looking for a sensible AOA probe to feed my Dynon D100. The
>> Dynon probe is ghastly - very big and heavy so I won't use that.
>>
>> I can't see what's wrong with a small, light weight probe based on
>> the same principle, ie an angled face with a hole in it. Has
>> anyone else designed their own and if so how well did it work?
>>
>> Anyone know of a good off the shelf probe suitable for the Dynon
>
> I don't know of an off-the shelf probe, but I wonder if something
> like the attached PDF would do the trick. Any half-competent
> machine shop should be able to produce a similar item, even scaled
> down a bit if thought desirable.
>
> I found the file in my "AOA" folder and I'm afraid I don't know
> where I got it, although the "airsoob" part of the filename is
> probably a clue.
>
> regards
>
> Rowland
> --
> | Wilma & Rowland Carson http://home.clara.net/rowil/
> | <rowil@clara.net> ... that's Rowland with a
> 'w' ...<airsoob_aoa_probe.pdf>
|