Perhaps I'm not clear on the process, but, what would one use to connect
the solid cable to the standard Europa throttle arm? Are the stock
fittings available without cable inserted?
Thanks,
Jeff - Baby Blue
346hrs
h&jeuropa wrote:
>
> Hi Troy,
>
> We tried to find piano wire to fit in the Europa supplied housings but were
> unable
to make that work. We purchased piano wire from McMaster but it comes rolled
in a 6" diameter coil and we were unable to get the wire straight enough
to work in the housings.
>
> So we purchased Bouden cables from ACS, PN 05-15500. To connect to the carbs
& throttle housing we used conduit adjusters from Lockwood PN BR03K. Had to
drill
them out to fit the ACS cable but the system works very nicely. Also lubed
the Bouden cable assemblies with graphite lube.
>
> Eric Trombley had a post on the forum several years ago on how he did this.
>
> Jim & Heather Butcher
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=147464#147464
>
>
>
>
>
>
>
>
>
>
>
>
|