Jim
does the Dynon use the 60deg. hole as static? or does it have two pitots
and a static.?
Graham
jimpuglise@comcast.net wrote:
> Jos-
>
> If you want to use the AOA indicator, they say that you must use the
> Dynon pitot. It has a second hole in it at about a 60 degree angle from
> the pitot and the Dynon computer looks at the difference between the two
> inputs. I have installed both that and the Europa pitot and will use
> the Europa pitot to drive a steam gauge backup ASI and the Dynon pitot
> to drive the Dynon. I will share the static source from the Europa tube.
>
>
> -------------- Original message --------------
> From: "josok" <josok-e@ukolo.fi>
>
> >
> > Hi Jim,
> >
> > Can't see that this has to be absolutely without tolerance
> exactly parallel. The
> > dynon aoa indicator will be learning the exact difference between
> the pitot and
> > stall tube later during a series of test stalls. In will try to
> use the standard
> > europa pitot and the stall warner tube as inputs. Don't know if
> that works, but
> > will find it out in a week or so. I have the dynon asi/stall
> pitot, but would
> > prefer not to pull more tubes through the plane.
> >
> > Kind Regards,
> >
> > Jos Okhuijsen
> >
> >
> >
> >
> >
> >
> > Visit - www.EuropaOwners.org
> >
> >
> >
> >
> & gt; **
>
> **
>
>
> **
--
Graham Singleton
Tel: +441629820187
Mob: +447739582005
|