Hi Troy,
I believe I sent this picture in before. I have the XS cowl but
creating a flange was necessary and worked well for me. Hope this
helpes.
Jeff
A258 / Gold Rush
On Mar 19, 2007, at 7:45 PM, Troy Maynor wrote:
> Hey Folks,
> I have this landing lite that I want to mount in the cowling below the
> oil
> cooler which is now below the spinner. I don't have the engine in
> place at
> this time. The light is about
> 2 1/2" in diameter and about 3 inches deep depending on how I mount
> it. Has
> anyone with the classic cowl put a light there? Any ideas on lens
> material I
> can fair into place at this angled area? Will I need to make it
> protrude out
> of the cowling, forward? Or, is there room to keep it within the
> contours of
> the original lines of the cowl. I am concerned about it hitting the
> oil
> pump or something. I am trying to see if it is worthwhile re hanging
> the
> engine one more time before I paint.
> Thanks.
>
> Troy Maynor
> N120EU Europa Monowheel Classic
> Left to finish:
> Paint,(some) interior,engine install, (some) wiring.
> Weaverville, NC USA
>
> <winmail.dat>
Jeff Roberts
RMMM
Roberts Marketing & Media Management
615-355-7575 Office
615-406-8651 Cell
|