Hello,
As above, I am trying to fit the cooling duct into the area
between the footwells.
(a) I fouled the centre area with mods to accomodate the Wilksch engine and
(b) I used Graham Singleton's firewall to compensate.
If you have employed (b) with the 914, could you confirm that
the ducting is not interfered with, as the instructions are not specific
regarding ducting vs. footwells as much as ducting vs. cowling (which is
months from ready to apply).
Please advise if you found the combination of the two, (b) and
914, compatible or at least manageable, as am loath to tackle the ducting if
it's not going to fit properly..
Ferg Kyle
Europa A064 914 Classic
PS: Graham, if you're in there, this in no way impugns the design but does
complicate the conception for the moment..........
|