thanks Steve,
its helps but anyway I remade them
and now the doors are almost too
tight (from point to point exactly 947 mm).
Raimo #417
----- Original Message -----
From: "steve v." <s.vestuti@virgin.net>
Subject: Europa-List: RE: door push rods
>
> hi Raimo,
>
> i too constructed the shoot bolts " within a mm " of the manual spec., and ,
as you have described , i also had variations in the protruding distance of the
shootbolts when extended. the factory reply was that if there is " 1/2" of the
flat area of the shoot bolt protruding " then that is suficient for the
installation
- i did not remake them as mine were within spec. hope this is of some
help.
>
> steve #573.
> ----------------
> Visit EuropaOwnersForum http://www.europaowners.org/
>
>
>
>
>
>
>
|