0.64 REPLY_TO_EMPTY Reply-To: is empty
hi Raimo,
i too constructed the shoot bolts " within a mm " of the manual spec., and , as
you have described , i also had variations in the protruding distance of the
shootbolts when extended. the factory reply was that if there is " 1/2" of the
flat area of the shoot bolt protruding " then that is suficient for the
installation
- i did not remake them as mine were within spec. hope this is of some
help.
steve #573.
----------------
Visit EuropaOwnersForum http://www.europaowners.org/
|