Many thanks for all the replies - ClickBond it is :-)
Kind regards,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Europa Club Vice-Chairman, Webmaster, PFA NC Representative
PFA EC Member
If you can keep your head when all about you are losing theirs, then it is
possible you haven't grasped the severity of the situation.
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1430 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Jeremy Davey
Subject: Europa-List: Bond-able studs
Folks,
Has anyone out there ever come across any studs that can be bonded to
fibreglass parts? I want to put P-clips on my aluminium fuel lines to hold
them in place, but can=92t find suitable fixings for the clips as I don=92t
always want to put holes through the piece I=92m attaching them to.
I=92m thinking of something like an AN3-3A bolt with an extra large head
intended for bonding.
My alternative, I think, is to make some up out of AN3-3A bolts with the
heads mounted in holes in 3mm ply, and the two ply faces laid up with bid.
Thoughts welcome!
Cheers,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Europa Club Vice-Chairman, Webmaster, PFA NC Representative
PFA EC Member
=93If you can keep your head when all about you are losing theirs, then it
is
possible you haven't grasped the severity of the situation.=94
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1420 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
|