Michael
You have a very good question. I am sure you will get answers on both
sides.
I did my heat curing (what I did of it) before I did the filling. I think
there might be some setting and print-though while it is curing. The
"gassing" of the epoxy (if that is the correct term) would seem to be better
done with out the added filler thickness over the lay-ups.
Jus my thought.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
----- Original Message -----
From: "Michael Grass" <M.Grass@comcast.net>
Subject: Europa-List: Post curing befor filling or after?
>
> Group,
>
> the subject line says it all. I am wondering if you should or don't have
> to
> post cure before filling the weaves. It seems to me that it make sense to
> first fill the weaves and then post cure everything together . I am still
> planning to use the kit supplied Expacell. (I do not want to start another
> discussion about Expancell and Superfill here).
>
> I wonder what the groups opinion on this subject post curing before
> filling
> is. If it is required, do you have to post cure before filling and after
> filling and sanding?
>
> Thanks
>
> Michael Grass
> A266 Trigear
> Detroit
> ----- Original Message -----
> From: "Fergus Kyle" <VE3LVO@rac.ca>
> To: <europa-list@matronics.com>
> Subject: Europa-List: RE: Replacing Bushes
>
>
>>
>>
>> ----- Original Message -----
>> From: "JonSmith" <jon.smith680@tesco.net>
>> Subject: Europa-List: RE: Replacing Bushes
>> | Many thanks for the advice - much appreciated. (careful) heat it is
>> then!
>> | Cheers, Jon
>>
>> Jon,
>> Let us know how it went when you're done...... It could come
>> upon us too!
>> Regards, Ferg
>> A064
>>
>>
>>
>
>
>
|