> >I can see the attractions of a thinner tyre. It would certainly give much
> >better clearance on the brake master cylinder and the brake caliper. But
I
> >am a
> >
> >bit worried about the 15mm bigger diameter. There is already very little
> >clearance between the tyre and the flap push rod, and with a bigger
> >diameter tyre
> >
> >this could become a problem.
> >
> >Regards
> >John
>
> John
> shouldn't be a problem, the tyre should go past the side of the flap push
rod.
> Graham
The set angles of the Flap Push Rod are not cast in stone, you can make
adjustments, I did so as I have made and installed a mud guard.
Peter #198.
|