Dean,
I had to modify my cowl. This is not an uncommon problem, however it is a
lot of messing around , best avoided if possible.
Paul
N378PJ ~ 140 hours and still grinning
----- Original Message -----
From: "Dean Seitz" <daseitz@cfl.rr.com>
Subject: Europa-List: Fitting Cowl
>
> A question for the XS builders with a 914 turbo. I am just starting to fit
> the cowl. The instructions say to set the front flat of the cowl 1 inch
back
> from the face of the engine hub. When set at 1 inch the starboard exhaust
> pipe is against the front of the cowl at the bottom of the round intake
> hole. Is this correct and I need to modify the cowl or did I do something
> wrong somewhere?
>
> Dean Seitz
> A284 N284A
>
>
|