All,
I have a Digiflight 100 Autopilot supplied by Trutrak Flight Systems.
On listening to a radio interview with Dennis Vories on
www.kitplanes.com/Redirect/radio/2012303.asp
I note that Dennis installed the servo for his Digitrak through the Port
side spar opening, and mounted it to the bulkhead directly behind the
seat. He says it is easy to retrofit on an existing aircraft (Europa of
course)
The interview also states that photos of his installation were to be
placed on Trutraks web site but unfortunately this has never eventuated.
Enquires to Trutrak have revealed the CD with the photos was corrupt.
Is anybody on the list familiar with this installation and if so, do you
know of any photos that might be available of same? OR does anybody
know of someone else who has done the same sort of installation who
might be able to furnish a few photos?
I am familiar with two methods of putting the servo under the seat and I
may yet have to do it this way but my preferred choice at this time is
as described above.
BTW, anybody unfamiliar with the Dennis Vories interview would more than
likely enjoy it. You have to wade through a bit of crap at the
beginning but once the actual interview commences, it is quite
interesting. It was recorded some time ago now but is still worth
hearing.
Regards
Kingsley
Mono Classic 281 in Oz
|