So would that mean 3MM aluminum is stonger and that 4 or 5 layers of flat
glass bid would not work for this aplication?
Jeff
>
> Actually the flat faces on the panel are NOT just epoxy-glass - the strength
> comes from a piece of 1/8 inch / 3 mm plywood sandwiched between the glass
> layers.
>
>
> Best regards,
>
> Rob Housman
> Europa XS Tri-Gear A070
> Airframe complete
> Irvine, CA
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com]On Behalf Of Jeff Roberts
> To: europa-list@matronics.com
> Subject: Re: Europa-List: panel material
>
>
> on 4/26/04 8:12 PM, Robert Berube at bberube@tampabay.rr.com wrote:
>
>
> Quick question on this topic. Since the original panel was designed using
> fiberglass why not lay up some ply's to make the bolt on panel out of it.
> Seams as though it would be easier for a homebuilder to work with. If so how
> many layers are enough for strength for say the usual 6 pack?
>
> Jeff
> A258
>
>
> <bberube@tampabay.rr.com>
>>
>> Paul,
>> All the panels we make and have made by Aerotronics, Gulf Coast Avionics,
>> Etc. are made with .063 Aluminum, 2024 or 6061 generally. Other alloys
> can
>> certainly be used.
>>
>> Bob
>> Flight Crafters
>>
>
|