<<<< Are there good reasons for not putting the flash generator units in
the wings, on an inspection cover? The size is 9 x 14 cm base, 6.5 high.
weight 250 gr. How is the reliability of these (aeroflash) units? Maybe
the inspection cover could be made when, if ever, needed, and just fix
the units inside? It would save some cable, keep the high voltage far
---From other equipment, be on a neutral c&g point and save space for other
gadgets in the fuselage. Comments please! Jos Okhuijsen, #600, close to
closing (wings) >>>>
I mounted my Whelen strobe power packs (HTS, CF) on small inspection
hatches just inside the wing tips on the lower surface. Works fine, no
interference. I have had mine in service for 2 1/2 years, no reliabilty
problem so far.
On the subject of oil pressure sender reliability, I secured the sender
body with a large 'P' clip to minimise vibration.
Cheers, John
N262WF, XS mono, 912S
Mooresville, North Carolina
|