Rowland
I discovered a neat little trick. It was after several times cleaning out
filler from hinges that I came up with it.
I had a problem getting the filler out of the hinge wire holes. An hobby
knife cleaned up the 1/2" spaces but the holes were really a problem.
I found that plastic trimmer line for the lawn trimmer just slipped in the
holes before I filled. Then when cleaning up, the knife cut the line off and
I could poke out the little pieces very easily.
You may have gathered that I did fill all the way to the top of the
knuckles.
Hope this helps.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
Starting back on the test flights.
> I'm starting to do some filling (so it won't be all left to the end
> of the job) and am wondering how others dealt with the hinges already
> All thoughts welcomed!
>
> regards
>
> Rowland
|