on 11/13/03 2:49 PM, JohnDHeykoop@aol.com at JohnDHeykoop@aol.com wrote:
>
> Hi Neville
>
> OK, you are the expert, and if you say it is necessary to trowel on up to a
> 1/4 inch of filler, that's how I'll do it.
>
> But I would like to understand why. What is the point of putting on such a
> thick layer of Expancell if you are going to sand nearly all of it off?
>
> Regards
>
> John Heykoop
> XS mono G-JHKP, #536
>
>
>
>
>>
>
>
>
>
The point I think Nevel is making is up to a 1/4 of an inch. From one that
is done filling and sanding I will say he is right. When you try to put on
the minimum you end up re-filling waiting for cure then re-sanding. It takes
longer! Just make sure to fill until you cant see the weave anywhere. If it
ends up being 1/4 inch its OK! Easier to sand off a lot once than to
re-fill & sand.
Jeff
A258
|