Hello Bob
Congratulations for your web site and Aicraft they are beautiful.
What servo model do you used for the aileron?
Thanks
Michel Auvray Classic monowheel N145-220 hours(to day)
--|--
--------(*)--------
Michel AUVRAY
-----Message d'origine-----
De : owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] De la part de Bob
Jacobsen
Envoy : mardi 11 novembre 2003 02:04
: europa-list@matronics.com
Objet : Re: Europa-List: roll trim tab and servo installation
--> <jacobsenra@hotmail.com>
Fred,
Many of us have had excellent luck using model airplane servos mounted
in
the ailerons. I mounted mine after the ailerons were built but before
filling etc.
You can see pictures of an installation at
www.galaxyhobby.com/europa.htm
If you have specific questions just e-mail me. All the parts required -
including servo driver, servo, linkages etc come to about $100 - cheaper
and
faster than most other methods, plus it's almost totally hidden. Any
good
hobby shop should have what you need.
Bob Jacobsen
A131
>From: "Fred R. Klein" <fklein@orcasonline.com>
>Reply-To: europa-list@matronics.com
>To: <europa-list@matronics.com>
>Subject: Europa-List: roll trim tab and servo installation
>Date: Mon, 10 Nov 2003 16:23:28 -0800
>
>--> <fklein@orcasonline.com>
>
>Hi All,
>
>I'm familiar with the desireability of incorporating roll trim in the
>XS.
>
>Can someone point me to an info source for a tried and true
>installation?
>
>When is the optimal time to install it?..my sense would be after the
>ailerons have been trial fitted to the wings (but what do I know?).
>
>Fred, A194
>
>
=
==
direct advertising on the Matronics Forums.
==
==
==
|