Re: NSI CAP 140 Pitch Gauge

[Nigel Charles <72016.3721@compuserve.com>]

Message text written by INTERNET:kevin@ukmicrolights.com
>I didn't realise you could get a pitch gauge for the prop. I would be very
interested in retrofitting one if it not too much hassle.
<

You can but the price is unacceptably high - in the order of 500 when I
looked at it. If you are interested I designed my own for 50 which
actually indicated degrees to 0.1 degree. However as it was using the worm
drive as a reference it was only that accurate at each end of the scale. 

Nigel Charles