europa-list
[Top] [All Lists]

Re: Europa and the Rotax 914.

Subject: Re: Europa and the Rotax 914.
From: Jaussi <jaussi@easilink.com>
Date: Mon, 25 Feb 2002 20:50:02
Sorry, I have to correct the last neassage after doing a quick check.   The
site is not Rotax.com, but kodiakbs.com.  The 912 installation manual is
there, but for the 914 all that is available there are the parts,
maintenance and operator's manuals.  The parts manual could help answer a
lot of questions as it can give a pretty accurate picture of what is there.
-----Original Message-----
From: Jaussi <jaussi@easilink.com>
Date: Monday, February 25, 2002 8:40 PM
Subject: Re:  Europa and the Rotax 914.


>The 914 Installation manual can be downloaded from the web at
www.rotax.com.
>-----Original Message-----
From: Tony S. Krzyzewski <tonyk@kaon.co.nz>
>Date: Monday, February 25, 2002 5:31 PM
>Subject: Re:  Europa and the Rotax 914.
>
>
>>
>>
>>>> I am not sure what the turbo control unit does - is it connected to
>>wires?
>>
>>It has a premade loom to the engine, another to the two pressure sensors
>>which mount firewall forward, another to the wastegate control servo and
>>then free wires for power, turbo disable switch and the two turbo
>>indicator lights. The loom to the pressure sensors is very short and
>>this limits the position of the TCU.
>>
>>>> If so, can it be mounted anywhere on the firewall above the bottom of
>>the panel?
>>
>>Just about but you do need to cater for the fact that the pressure
>>sensors are mounted fairly high up on the firewall to allow for a water
>>trap in one of the air lines to the sensors.
>>
>>>> Right now, I have an ILS display in the section above the gear lever.
>>That goes all the way to the face of the firewall.
>>
>>You'll get away with that by moving the TCO to starboard providing you
>>don't have any long instruments in the radio bay which would conflict
>>with it.
>>
>>>> The box on the top of the tunnel looks like it has a cable - needing
>>to be in a specific place.
>>
>>It does have a cable ... the wastegate cable. I'd keep the Wastegate
>>servo in the position given by Europa.
>>
>>>>This would be much easier if I could just get my hands on an engine!
>>
>>I picked up a 914 installation manual at Sun-n-fun a couple of years
>>back which helps the firewall fitout process considerably.
>>
>>Tony
>>
>
>



<Prev in Thread] Current Thread [Next in Thread>