Thanks Tony, Is it advisable to install one or two on the TP cables?
-----Original Message-----
From: owner-europa@post.aviators.net
Subject: RE: turnbuckles
Use the MS series with the clips which will save you having to safety
wire them.
For each turnbuckle you need...
1 x MS21251-BS Barrel
1 x MS21255-3LS
1 x MS21255-3RS
2 x MS21256-1 clips
This gives you a turnbuckle with cable eyes.
A tip. When installing the ends, position the cable eyes so that the
groove to take the pin is pointing towards to the inspection hole. When
you ever come to adjust the turnbuckle you'll find it easier to reinsert
the pin if you can see the groove.
Tony
|