Hi! Tom.
IMHO go for the turnbuckles. You will need a bloody wand to adjust them
retrospectively if it becomes necessary. The clearance for the balance
weight travel is very close so fine adjust capability is vital . Also
assists if you can slack them off if you should need to oversize the
tail-plane drive pins.
Regards
Bob Harrison G-PTAG
-----Original Message-----
On Behalf Of Tom & Cathy Friedland
Sent: 23 July 2001 04:49
Subject: rudder adjustments
Hi You All Bright Experienced E-philes,
I am finally installing the rudder-tailwheel cables on a XS mono sans
the rudder mod. The manual is quiet (what is new) about any way to
adjust rudder travel or tail wheel-rudder travel. I have looked for
past advice on how to do so. It looks to me the only way to do so is to
install a pair of turnbuckles both between the rudder horns and the
rudder pedals and the horns. Am I missing something? Is there another
way?
Any advice appreciated.
Tom Friedland XS mono, A079, N96V
|