Hi! Ian.
Whilst mine is a Mk1 and yours an XS I would suspect that what you have is
quite normal. It just needs trimming back to clear the aileron at full
deflection position, presuming that there is still adequate bonded structure
left after removal of the 8mm?
Regards
Bob Harrison G-PTAG
> -----Original Message-----
> From: owner-europa@aztec.houxou.com
> Subject: Re: Europa_aileron fitting problem
>
>
> When I attempt to fit the ailerons to the wings ,the top lip of
> the aileron
> leading edge close out.(on the wing itself) fouls on the top
> surface of the
> aileron by some 8 mm . has anyone else had this problem and how
> did you cure
> it . any suggestions would be greatly appreciated.
>
> Ian Coxall No 422
>
>
|