We have some queries regarding the initial parts of the fuel system
installation and would appreciate any thoughts other builders might have.
Firstly given that there is some concern regarding length of service of the
fuel hose supplied as standard, has anyone upgraded the fuel lines fitted to
their Europa (ref. Flyer magazine and the Europa news letter) What we had in
mind was one of the stainless steel braided lines e.g. Aeroquipe 601 OR 666
hose. Does anyone have any thoughts on fuel lines and where we might get
them? Also could anyone explain AN fittings and how they differ from those
supplied.
Secondly what is the considered opinion out there about the Andair fuel
valve over the unit supplied with the kit - it seems to be sensible to have
a unit which requires a consciously different movement to select the off
position - again any thoughts particularly from those who might have fitted
this item.
Thirdly we are considering fitting a fuel gauge in addition to the sight
tube. Again from the flyer article of Oct.99 one such unit appears to be the
Avilec gauge. Does anyone possess further information or know where they
can be sourced?
Finally does the fitting of any of the above require PFA mod approval -
presumably the fuel gauge would, but what if we just upgrading things like
fuel lines and tap?
All information greatly received
Ian Robson kit 432
|