Paul McAllister wrote:
> 5. I can't really assemble the wings into the cockpit module to check for
> clearance because its too darn cold this time of year. I was going to use
> the dummy spars but I noticed that they aren't quite as thick as the actual
> spars. Is this likely to be a problem ?
>
> Happy building & flying in 2000.
>
> Regards, Paul McAllister (363)
Paul,
The dummy spar may not have the correct
spacing for the the wing pins. At the least,
check that the spacing is correct by placing
the dummy spar against the wing spars and
inserting the pins. If it is not a perfect fit,
use the wing spar for alignment when
bonding the spar pin bushes into the
cockpit module.
Terry Seaver
A135
|