SCOTLAND]
>> Its always worth checking the residue in the bottom of the pot the
morning
after. Any swirl marks, or worse, sticky bits means poor mixing. A little
experience will soon teach you good mixing habits. <<
Hi Graham,
pmfji, a word from a well served modellbuilder: mixing epox for some 25
years, using an old and rather cheap analogoues scale, mixing batches down
to _5g_, only one time, the residue in the pot remained sticky - that was
when i tried to mix with a mechanical mixer instead of swirling an old
wooden stick....
just my 0.02
Karl
|