If you are implement the XS mod as supplied by Europa (as opposed to Graham
Singleton's enhancement) you will find that the starboard cable passes some
inches away from the pitch retaining bracket. Make up a foam block with a
channel in the top in which to encase a short length of nylaflow tube. Flox
the tube in place then glass the block onto the base of the fuselage such
that the rudder cable assumes the correct course when passing through the
tube. Placing a slit in the top of the tube will allow you to extract the
rudder cable if ever required in the future. On the port side you can simply
embed the tube into the pitch support block.
Tony
|