In message <971124113140_915346200@mrin38>, JohnJMoran@aol.com writes
>I am in the process of assembling an idler plate mounted on the top of the
>original tailwheel shaft and connected by springs to the tailwheel arm rather
>than installing the new tailwheel - I mentioned this in an earlier note.
> Experimental aviation with a capitol E, I guess.
>
>
.........
Would you please outline how you transmit the movement to the tailwheel
and where the springs are located relative to the idler arm and the
tailwheel. It should be relatively easy to obtain a new arm for you.
Regards,
Ken Whiteley
#19 ( but not very far advanced with the construction)
|