Graham,
Woops! That last message of mine was not meant for the forum. Nothing meant,
only crosschecking. Thanks for the continued advice to "us that are dragging
the chain, or only just starting"
Regards
Tony Renshaw
Builder No.236.
>>> Important thing, especially
>with the rudder is that all three hinge pins are in line. Hence sticking
>them onto the straight edge before bonding to the control surface. ALSO
>LEAVING OUT THE POP RIVETS TILL THE BOND HAS CURED".<<
>
>If your trailing edge is not straight as soon as the straightedge is removed it
>will spring back to it's original shape before it was distorted to a straight
>line by your jig. The hinges will no longer be in line either.
>
>Graham
>
>
|