We had very rough running,, and overheating, when the carb rubber connectors
betwen the carbs and the inlet manifolds became loosened.
Mike
G-OMIK
----- Original Message -----
From: "Richard Iddon" <riddon@sent.com>
Sent: Monday, June 04, 2007 6:37 PM
Subject: RE: Europa-List: Rotax 914 / rough running
>
> Gert,
>
> Check the throttle cables are running freely. I had one of mine sticking
> and kinking in the throttle box causing rough running at higher rev's.
>
> Richard Iddon G-RIXS
>
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Gert
> Dalgaard
> Sent: 04 June 2007 17:03
> To: europa-list@matronics.com
> Subject: Europa-List: Rotax 914 / rough running
>
>
> Hi all
>
> I have a problem with my Rotax 914 which now have performed 450 hours
> without ever missing a hart-beat.
> It starts perfect and runs as expected up to 3.000 RPM's.
> Above 3.000 it becomes rough and when adding more power it runs even
> more and more rough.
>
>
> 03/06/2007 12:47
>
>
>
|