RE: Europa-List: Icom A-200 Comm

[Ken Stribling <ken@striblingranch.com>]

I used jumper wires on mine to hook up in series, If I remember right
one power lead controlled the display

Ken S.

-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
MJKTuck@cs.com
Subject: Europa-List: Icom A-200 Comm


Hi Folks,

Anyone else wired up an Icom A-200? The instructions ask for two pairs
of 18 
swg for power and ground. By that I assume they mean one pair of 18 swg
wires 
for power and one pair of 18 swg wires for ground. 

Power goes to two pins (14 & R) and ground to four pins (6,15,F & S). Do
all 
these pins have to carry two 18 swg wires? I think I might have trouble 
getting two wires into the Molex pin and fit in the plastic Molex
connector.

Any advice would be appreciated.

Regards,
Martin Tuck
N152MT
Wichita, Kansas