Hi Folks,
Anyone else wired up an Icom A-200? The instructions ask for two pairs of 18
swg for power and ground. By that I assume they mean one pair of 18 swg wires
for power and one pair of 18 swg wires for ground.
Power goes to two pins (14 & R) and ground to four pins (6,15,F & S). Do all
these pins have to carry two 18 swg wires? I think I might have trouble
getting two wires into the Molex pin and fit in the plastic Molex connector.
Any advice would be appreciated.
Regards,
Martin Tuck
N152MT
Wichita, Kansas
|