Thats the sternpost, along the rear of the vert stb, that the rudder hinges
attached
to and the tailwheel spring goes through (thus the hole).
Arildite 420 is the adhesive for the bonding of the prepreg parts. Huntsman
sells
it in the US. Aeropoxy is used for layups on the Europa.
Cheers,
Pete
A239
Ottawa, CA
> On Apr 16, 2017, at 11:14 PM, n7188u <chmgarb@gmail.com> wrote:
>
>
> Europa forum members,
>
> I apologize in advanced but I may need the forums help to identify some of the
parts on kit A291 (I'm sure Marty will also chime in). I have been able to do
well with most of them but I haven't been able to identify some of the parts
I have.
>
> One part I haven't been able to identify is this I include a picture of. It is
a long slender part made of glass with a wood core at the wide end.
>
>
> Another question I have is regarding epoxies that can be used on this
> airplane.
My preference is for the MGS epoxies and it is what I was using in the Cozy.
I started using L285 but when it became hard to get and expensive due to the
Hazmat classification I switched to the L335 which is also approved for all
aspects
of the Cozy construction. A littler harder to use than L285 (slightly thicker)
but a good option given the price of L285. I found during a search of
the list that L285 is OK for the Europa but is the L335 also approved? Can these
epoxies be used in lieu of the Araldite 420? Is there official documentation
on the use of these alternatives on the Europa? If the Araldite must be used,
what are good sources for it?
>
> All info may be available online, I just need some guidance getting started
> with
the right references.
>
> Thanks for the help.
> Chris
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=468557#468557
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/20170415_120853_resized_121.jpg
>
>
>
>
>
>
|
