Europa-List: Re: seat base foam blocks

Subject:	Europa-List: Re: seat base foam blocks
From:	graeme bird <graeme@gdbmk.co.uk>
Date:	Sat, 1 Apr 2017 13:21:56


since fuel melts the and its where the filters/tubes are and its pretty hard to
change the filters without some spillage, it seems a good idea to coat them.
Its what I did with mine but I certainly didnt come up with the idea.

--------
Graeme Bird
G-UMPY -  Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2 axis
ap, pflarm, ads-b out, 8.33khz, mode S, FP-5, Aera500 &amp; SD on Nexus,
280 hours &amp; 5 years on the Mono, 900 total
g@gdbmk.co.uk


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=467925#467925

<Prev in Thread]	Current Thread	[Next in Thread>
Europa-List: Re: seat base foam blocks, graeme bird <= Europa-List: Re: seat base foam blocks, graeme bird

Previous by Date:	Re: Europa-List: seat base foam blocks, Mike Christine Duane
Next by Date:	Europa-List: Re: seat base foam blocks, graeme bird
Previous by Thread:	Re: Europa-List: seat base foam blocks, Mike Christine Duane
Next by Thread:	Europa-List: Re: seat base foam blocks, graeme bird
Indexes:	[Date] [Thread] [Top] [All Lists]