I think my controller may be like yours. Take off at full fine , then turn i
t back to climb and later to cruise if you like. I was thinking the fine se
tting was labeled take off. I had some problem with the controller ten year
s ago and had to sent it to Florida dealer to be re- booted. Has been no pr
oblem since and now at 650 hours. I think there must be a sensor on the spi
nner back plate.
Sent from my iPad
Ken Carpenter
> On Feb 9, 2017, at 4:42 PM, philip george <philipgeorge347@hotmail.com> wr
ote:
>
> I hope someone can help . We are at present test flying G-JAGY a Europa m
ono imported from the US and converted to a Tri-gear by Nev Eyre. It=99
s a 914 with Airmaster prop with Warp drive blades and the original AC100 c
ontroller.
> whilst test flying the prop works ok in manual mode. Switching to Auto
it runs to full fine . How does it detect RPM is it the sensor on the back o
f the spinner flange? If so is it a light sensing counter using a light sour
ce ? If this all sounds a bit vague I am a third party relaying this request
and my Europa does not have a VP prop. Some advice on the operation would b
e of great help. As Airmaster do not support the old AC100 controller any lo
nger.
> Any help would be much appreciated .
> P
hilip George.
>
> Sent from Mail for Windows 10
>
|