Thanks
Will
William Daniell
LONGPORT
+57 310 295 0744
On Thu, Apr 14, 2016 at 11:23 AM, Christoph Both <christoph.both@acadiau.ca
>
wrote:
> Hi Will,
> I used the heat barrier product with over silica backed stick on. Glue is
> good up to 300F, metal surface up to 2000F. I used this older product, th
ey
> now have a 24K new product I am not familiar with.
> Stuck it onto the firewall at all not critical sections 2012. Still stick
s
> on after 250 hours.
> http://www.thermotec.com
> Critical sections were covered with an Aircraft Spruce both sides
> stainless steel backed product:
> Firewall-2000 Product# 05-00948 which I used to also cover the entire
> motor mount cavity up to the firewall. Make sure you order a tube of the
> 2000F fire retardant "silicone=9D with it to seal all the edges. I
riveted
> the sheet with mounting washers to the firewall. This way the entire
> footwell back to the tunnel is being protected for my TRI. Bud suggested
> this and its good extra insurance.
> Christoph
>
>
|