Gidday Will,
Have you inserted the short steel reinforcements in the fuselage engine fram
e, because if you have the wall thickness has now increased dramatically, an
d the attachment forces now are also shared by the bolts holding them in sit
u, as I vaguely recall. I'd be surprised if you couldn't open them out.
Regards
Tony Renshaw
Sent from my iPad
> On 5 Apr 2015, at 4:09 am, William Daniell <wdaniell.longport@gmail.com> w
rote:
>
> Yup....the rotax ring mount has an 11mm hole and the engine mounting frame
is 10mm.
>
> Can anyone help?
>
> Will
>
>> On Apr 4, 2015 4:37 PM, "William Daniell" <wdaniell.longport@gmail.com> w
rote:
>> I am mounting the rotax ring mount to the engine mounting frame using the
M10x110 hex head bolts.
>>
>> The issue is that the M10 bolts have quite a lot of slop in the rotax rin
g mount, my guess is that the rotax ring mount holes are about 1/2 to 1 mm l
arger than the bolts.
>>
>> Is this normal?
>>
>> The bolts fit perfectly in the Europa engine mounting frame.
>>
>> thanks
>>
>> Will
>>
>>
>> William Daniell
>> LONGPORT
>> +57 310 295 0744
>>
>>
>> arget="_blank">http://www.matronics.com/Navigator?Europa-List
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>>
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
|