Re: Europa-List: Pitot static

[Richard Iddon <riddon@sent.com>]

That sounds like a good solution.

Thanks Pete.

Richard Iddon

G-RIXS
On 17 Jun 2014, at 08:28, Pete Lawless <pete@lawless.info> wrote:

> 
> Hi Richard
> 
> Been there done exactly the same thing!  Drill out the remains of the plastic
plug. Drill a small hole right through the metal about half an inch back from
the end of the static pipe and plug the end. Works a treat, no noticeable 
difference
on indications and you can't knock the end off again.
> 
> Regards
> 
> Pete
>