Re: Europa-List: Preheating glass cloth

[rparigor@suffolk.lib.ny.us]

        Hi Tony


        Warm up Resin and hardener a little, apply mixed resin to cloth on a
plastic sheet, use heat gun to warm up all, then squeegee off excess,
warm up target area with heat gun if needed.


        You can layup cloth with Redux like this if you are adhering to metal.


        When filling with plastic or glass balloons, if you mix really really
dry, you can do last pass with a heated spackle type knife after you heat
the dry mix and can usually get done what many think are impossible.


        Ron Parigoris